16 protocols
AccessionType
hybridization
RNAi3 Cy5 / WT2 3 Cy3 : 30pmol. Hybridization Protocol: CATMA slides (Corning Microarray Technology, CORNING) are pretreated in the prehybridisation solution (1 % BSA, 0.1 SDS, 5X SSC ) at 42°C for 60 min. They are dipped a couple of times in distilled water at room temperature, then in isopropanol and dried immediately by compressed nitrogen stream. Slides were placed in Corning hybridization chambers with a 25x60 lifterslip and 10ul of distilled water for each groove. The target was diluted to a final volume of 60 µL as follows 15µl of purified, labeled cDNA, 15 µl of 4X Hybridization Buffer ( 20X SDS, 0.4 % SDS), 30 µL formamide. The target mixture is heated for 3 min at 95°C, put on ice for 30 sec and centrifuged to remove dust for 1 min. The target mixture was put on the chip as quickly as possible. The microarray is sealed in a chamber and submerged in a 42°C water bath for approximately 16 h. The microarray is washed for 4 min in 1xSSC, 0.2% SDS (42°C); 4 min in 0.1x SSC, 0.2% SDS (RT); 4 min in 0.1x SSC, 0.2% SDS (RT); 4 min in 0.1x SSC (RT); dipped a few times in distilled water and dried immediately by compressed nitrogen stream.
labeling
labelling Cy3 and Cy5 direct, amplification=yes, aRNA 5 ug. Labelling protocol: 5 µg of aRNA (8µl) mixed with 2 µl of random nonamers 1µg/µl and 0.5 µl of RNAse Out 40 U/µl, denatured 10 min at 70 °C and chilled on ice. The followig components were added to the sample 4 µl of first strand buffer 5 X, 1 µl of 10 mM dNTP/2mM dCTP, 2 µl of 0.1 M DTT, 1.5 µl of Cy3-dCTP or Cy5-dCTP (Amersham Pharmacia Biotech, 25nmol tube, PA5502), 1 µl of SuperScript II RT 200U/µl. Then it was incubated at 42°C for 2.5 hours and chilled on ice. The sample was denaturated by adding 2 µl of NaOH 2.5M and incubated at 37 °C for exactly 15 min, then was added 10 µl of 2M MOPS and put on ice. The dyes were purified with the QIAquick PCR Purification Kit (QIAGEN).
bioassay_data_transformation
ID_REF = ID number
VALUE = Normalized log2 ratio median intensity of Ch2(Cy3)/Ch1(Cy5) (Ch1=reference)
hybridization
WT2 3 Cy5 / RNAi3 Cy3 : 30pmol. Hybridization Protocol: CATMA slides (Corning Microarray Technology, CORNING) are pretreated in the prehybridisation solution (1 % BSA, 0.1 SDS, 5X SSC ) at 42°C for 60 min. They are dipped a couple of times in distilled water at room temperature, then in isopropanol and dried immediately by compressed nitrogen stream. Slides were placed in Corning hybridization chambers with a 25x60 lifterslip and 10ul of distilled water for each groove. The target was diluted to a final volume of 60 µL as follows 15µl of purified, labeled cDNA, 15 µl of 4X Hybridization Buffer ( 20X SDS, 0.4 % SDS), 30 µL formamide. The target mixture is heated for 3 min at 95°C, put on ice for 30 sec and centrifuged to remove dust for 1 min. The target mixture was put on the chip as quickly as possible. The microarray is sealed in a chamber and submerged in a 42°C water bath for approximately 16 h. The microarray is washed for 4 min in 1xSSC, 0.2% SDS (42°C); 4 min in 0.1x SSC, 0.2% SDS (RT); 4 min in 0.1x SSC, 0.2% SDS (RT); 4 min in 0.1x SSC (RT); dipped a few times in distilled water and dried immediately by compressed nitrogen stream.
bioassay_data_transformation
ID_REF = ID number
VALUE = Normalized log2 ratio median intensity of Ch1(Cy5)/Ch2(Cy3) (Ch2=reference)
feature_extraction
The raw data comprised the logarithm of median feature pixel intensity at wavelength 635 nm (red) and 532 nm (green). No background was subtracted. An array-by-array normalization was performed to remove systematic biases. First, we excluded spots that were considered badly formed features by the experimenter (Flags=-100). Then we performed a global intensity-dependent normalization using the loess procedure (see Yang et al., 2002) to correct the dye bias. Finally, on each block, the log-ratio median is subtracted from each value of the log-ratio of the block to correct a print-tip effect on each metablock.
image_aquisition
GenePix Pro 3.0, Cy3:pmt voltage 532nm,480V,laser power 35%, Cy5:635nm,pmt voltage 480V,laser power 30%
specified_biomaterial_action
no treatment
grow
leaf - Media: MS medium + basta 10 µg/mL for 7 days. Plants were subsquently transferred on soil. Hygrometry: 50%/70% (day/night) Temperature: 22°C Light: 200 µE m-2 s-1
hybridization
WT2 4 Cy5 / RNAi4 Cy3 : 30pmol. Hybridization Protocol: CATMA slides (Corning Microarray Technology, CORNING) are pretreated in the prehybridisation solution (1 % BSA, 0.1 SDS, 5X SSC ) at 42°C for 60 min. They are dipped a couple of times in distilled water at room temperature, then in isopropanol and dried immediately by compressed nitrogen stream. Slides were placed in Corning hybridization chambers with a 25x60 lifterslip and 10ul of distilled water for each groove. The target was diluted to a final volume of 60 µL as follows 15µl of purified, labeled cDNA, 15 µl of 4X Hybridization Buffer ( 20X SDS, 0.4 % SDS), 30 µL formamide. The target mixture is heated for 3 min at 95°C, put on ice for 30 sec and centrifuged to remove dust for 1 min. The target mixture was put on the chip as quickly as possible. The microarray is sealed in a chamber and submerged in a 42°C water bath for approximately 16 h. The microarray is washed for 4 min in 1xSSC, 0.2% SDS (42°C); 4 min in 0.1x SSC, 0.2% SDS (RT); 4 min in 0.1x SSC, 0.2% SDS (RT); 4 min in 0.1x SSC (RT); dipped a few times in distilled water and dried immediately by compressed nitrogen stream.
nucleic_acid_extraction
RNAi4:8.1ug.
nucleic_acid_extraction
RNAi3:9.4ug.
grow
leaf - Media: MS medium for 7 days. Plants were subsquently transferred on soil. Hygrometry: 50%/70% (day/night) Temperature: 22°C Light: 200 µE m-2 s-1
nucleic_acid_extraction
WT2 3:5.3ug.
nucleic_acid_extraction
WT2 4:5ug.
hybridization
RNAi4 Cy5 / WT2 4 Cy3 : 30pmol. Hybridization Protocol: CATMA slides (Corning Microarray Technology, CORNING) are pretreated in the prehybridisation solution (1 % BSA, 0.1 SDS, 5X SSC ) at 42°C for 60 min. They are dipped a couple of times in distilled water at room temperature, then in isopropanol and dried immediately by compressed nitrogen stream. Slides were placed in Corning hybridization chambers with a 25x60 lifterslip and 10ul of distilled water for each groove. The target was diluted to a final volume of 60 µL as follows 15µl of purified, labeled cDNA, 15 µl of 4X Hybridization Buffer ( 20X SDS, 0.4 % SDS), 30 µL formamide. The target mixture is heated for 3 min at 95°C, put on ice for 30 sec and centrifuged to remove dust for 1 min. The target mixture was put on the chip as quickly as possible. The microarray is sealed in a chamber and submerged in a 42°C water bath for approximately 16 h. The microarray is washed for 4 min in 1xSSC, 0.2% SDS (42°C); 4 min in 0.1x SSC, 0.2% SDS (RT); 4 min in 0.1x SSC, 0.2% SDS (RT); 4 min in 0.1x SSC (RT); dipped a few times in distilled water and dried immediately by compressed nitrogen stream.